- New
assistant_photo
Worldwide express shipping
Language:
assistant_photo
Worldwide express shipping
LoRaWAN® Data Logger - Seeed Studio
- Description
The battery-powered IP66 wireless data logger/DTU supports RS485/Analog/GPIO sensors and has built-in Bluetooth and APP service for OTA configuration and remote device management.
Broad compatibility with various sensorsSupports all MODBUS-RTU RS485, Analog (4~20mA / 0~10V) and GPIO (level/pulse) sensors.
Compatible with worldwide LoRaWAN® networks.
Compatible with LoRaWAN® V1.0.3 protocol and can work with LoRaWAN® gateways (supports universal frequency plane from 863MHz to 928MHz).
Long range and replaceable battery power
With LoRaWAN® wireless transmission, S2100 supports built-in 19Ah battery and external 12V DC power supply, with ultra-long range of 2 km in urban areas and 10 km in line-of-sight.
Designed for harsh environments
Operating temperature from -40℃ to 85℃ and IP66 housing, suitable for outdoor use, exposure to intense UV rays, heavy rain, dust and other adverse conditions.
Remote configuration and management
The SenseCraft app and SenseCraft Data platform allow users to manage data and configure devices remotely.
Guaranteed high performance
Subjected to 6 reliability tests before release, it meets the requirements to function perfectly under extreme conditions.
Guarantee of high performance
The sensors can operate in harsh outdoor conditions. To ensure that the performance and durability of the sensors are consistent with their specifications over their entire lifecycle, the SenseCAP S210X passed 6 pre-release reliability tests, meeting the requirements to operate perfectly under extreme conditions.
The tests performed include:
High-low temperature test: verification of performance under adverse temperature conditions.
Compliance test: verification of consistency of values collected from multiple devices.
Waterproof test
Freezing test
Long-distance communication test: verification of packet loss during long-distance transmissions.
R&D and production testing: verification of the pass rate of multiple devices under factory conditions.Hardware overview
The SenseCAP S2100 Data Logger/DTU can connect to MODBUS-RTU RS485, Analog and GPIO sensors and transmit sensor data to the LoRaWAN network. With LoRa technology and IP66 design, this device offers stability and reliability, covering long transmission distances with ultra-low power consumption, making it ideal for outdoor use. It is specifically optimized for OTA updates thanks to its built-in Bluetooth, which enables quick setup and updating. It can be powered by battery or connected to an external 12V power supply. When 12V power is connected, the built-in replaceable battery is used as backup power. In addition, with the help of the S2110 converter, the S2100 Data Logger/DTU can connect to Grove sensors, making it an ideal solution for development, rapid prototyping, and small, do-it-yourself industrial-level LoRaWAN sensor implementations.The S2100 LoRaWAN Data Logger/DTU S2100 supports MODBUS-RTU RS485, Analog and GPIO inputs and transmits sensor data to the network
It can cover a transmission range of 2 km in urban settings and 10 km in line-of-sight while maintaining low power consumption during the transmission process. It features a replaceable battery with a life of up to 10 years and an IP66 industrial housing. It supports operating temperatures from -40℃ to 85℃ and can be used in harsh environments.
LoRaWAN Frequency
S210x devices are designed to support the universal frequency plane from 863 MHz to 928 MHz in a single SKU. In other words, each individual device can support the following frequency planes:Frequency plan Common name Sub-band EU863-870 EU868 ___ US902-928 US915 Sub-bands 1 to 8 AU915-928 AU915 Sub-bands 1 to 8 AS923 AS923 AS923_1, AS923_2, AS923_3, AS923_4 IN865-867 IN865 ___ KR920-923 KR920 ___ RU864-867 RU864 ___ The frequency plan is set to none by default, and the device will not transmit RF signals until configured via the Bluetooth app when it is first started. It can also be changed at any time to use other frequency plans.
Power options
Option 1: The data logger/DTU can operate in periodic mode. Powered by a standard 19Ah D-type Li-SOCl2 battery, readily available online, it can be installed and used outdoors without additional power supply.
Option 2: The data logger/DTU can operate in continuous power mode with an external 12V DC power supply. We provide a matching Junction Box kit, which allows rapido assembly of the data logger/DTU.
Support for industrial sensors with different interfaces
The LoRaWAN S2100 Data Logger/DTU is a single-channel collector and supports only one protocol at a time from the following:
- RS485: Supports the standard RS485 Modbus-RTU protocol
- Analog: 2 x 0~10V or 2 x 4~20mA
- GPIO: 1 x GPIO, to collect level or pulse signals
Interface Compatible sensors RS485 SenseCAP ORCH S4-A1B
pH Sensor RS485
PAR Sensor RS485
EC & TDS Sensor
Leaf temperature and humidity sensor
Light intensity sensor
RS485 temperature and humidity sensor
S500 Compact 5-in-1 weather sensor
S700 7-in-1 compact weather sensor
S900 Compact weather sensor 9-in-1
S1000 10-in-1 compact weather sensor with CO2 measurementAnalog Water leakage detector
Liquid level sensorGPIO Water leakage detector
RG-15 rain gaugeApplications
Precision agriculture, industrial manufacturing, smart buildings
The SenseCAP S2100 is compatible with the LoRaWAN® V1.0.3 protocol and can work with LoRaWAN gateways.
LoRaWAN® gateways can provide the LoRaWAN® network coverage needed to use these sensors. S210X devices can be connected to different LoRaWAN® gateways, and those provided by Seeed offer a seamless user experience.
Helium Network: The sensors operate in areas covered by the Helium network (check on Helium Explorer). You can check out the SenseCAP M1 LoRaWAN Indoor Gateway and the SenseCAP M2 Light Hotspot with software license on Seeed Studio.
LoRaWAN Network: Sensors run on LoRaWAN® networks, such as The Things Network, Loriot, Chirpstack, etc. You can check out the SenseCAP Gateway - LoRaWAN EU915 and the SenseCAP Multi-Platform LoRaWAN Indoor Gateway SX1302-US915 on Seeed Studio.
We recommend using the SenseCAP M2 Multi-Platform LoRaWAN Gateway, a standard LoRaWAN® gateway that supports connection to multiple network servers. With its affordable price of $99, its affordability is a significant advantage, especially in setting up a private LoRaWAN network.
Seeed provides the SenseCraft Data platform and SenseCraft app to help users manage and consult data remotely more efficiently.
- Web platform for device, data and key management - Seeed Studio IIoT Solutions allows users to manage SenseCAP devices and view data via the web. Associate and manage all devices with a single account
- Includes Dashboard, device management, data management and access key management
- Provides MQTT and HTTP APIs for further development
- Available for iOS and Android - Seeed Studio IIoT Solutions is a powerful app for data visualization and remote device management. Saves time: scan-and-play experience to complete configuration in 4 steps
- Suitable even for those with little or no technical knowledge to get started easily with sensor data
- Acquire and display data on clean user interfaces
- Set time intervals: improve battery efficiency
- Set threshold values: focuses attention on data requiring action-soon available
- Sends alarms if data goes out of safe range - soon available
In addition to working with existing sensor nodes, the S2100 data logger can be connected to the SenseCAP S2110 Grove Converter to provide a plug-and-play outdoor LoRaWAN sensor deployment experience with a wide selection of Grove sensors.
It is an ideal solution for development, rapid prototyping, and small, do-it-yourself industrial-level LoRaWAN sensor deployments. In addition, you can use your existing Seeed Grove sensors to build outdoor LoRaWAN sensors without writing code. This kit is definitely worth a try.
Package contains: 1 x LoRaWAN® Data Logger - Seeed Studio
Specifically, the kit includes:
- 1 x Sensor Node
- 2 x Holder
- 1 x Quick Start Guide
- 4 x Self-tapping screws KA4*20mm
You might need
- New
- New
- New
- Images
