Worldwide express shipping
Worldwide express shipping
PLA Economy ColorFabb
PLA Economy is Colorfabb's solution for all those users looking for a reliable source of quality material available in large format rolls. A specific type of PLA is selected for this material which offers great quality at reasonable cost.
It is the perfect material for users who print large amounts of filament, and who at the same time need reliability and consistent performance.
Colorfabb has selected 6 colors for this range of PLA Economy.
Features
- Material: colorFabb PLA Economy
- Diameter tolerance: ± 0.1 mm
- Density: 1.2-1.3 g • cm-3
- Glass transition temperature: 55-60°C
Tips & Tricks
- Suggested printing temperature: 195-220°C
- Suggested print speed: 40 - 100 mm/s
- Suggested printing bed temperature: 50-60°C (optional)
Print plan
Colorfabb's Economy PLA works well on both heated and unheated print beds. When printing on a cold plate, we recommend applying blue tape, or alternatively one of the specific adhesives.
The rough surface of the tape, or the adhesive layer created by the fixer, will provide sufficient adhesion for the first layer, so that you can print with almost no deformation.
When using a heated build plate, a plate temperature of 50-60 ° C is recommended.
Cooling down
For Colorfabb Economy PLA filament it is recommended to use 100% fan cooling for best detail and performance on complex protruding surfaces.
Large models tend to exhibit warping at the corners, printing with less cooling can reduce warping.
There are 6 products.