Worldwide express shipping
Worldwide express shipping
PA Neat
PA Neat is the new polyamide (nylon) from Colorfabb. A highly functional 3D printing filament.
PA Neat allows continuous use at 120°C while maintaining sufficient mechanical properties and therefore highly resistant to high temperatures. This makes it a perfect material for the professional user to make durable prints that need to show adequate performance. PA Neat is also not very prone to warping.
Features
- Material: Colorfabb PA NEAT
- Diameter tolerance: ± 0.1 mm
- Density: 1.14 g/cm3
- Glass transition temperature: 120C
Tips & Tricks
- Suggested Print Temperature: 265-290C
- Suggested printing speed: 30 - 40 mm/s
- Suggested Platen Temperature: (optional) ambient - 50°C
Printing surface
The material shows good results when printed at room temperature or with a cold plate. For some geometries or high density fillings a heated platen at 40°C/50°C is recommended. The use of a brim helps when printing with an unheated platen. The material has been tested on buildTak and glass top. When printing on a glass top, we recommend using a fixative to keep the filament in the first few layers adhered to the top.
Cooling
As always, less cooling results in better layer-to-layer adhesion, more cooling produces better results on complex and protruding surfaces. A fan speed of 50% is recommended as the default setting. Set a lower fan speed if your print geometry allows it.
There is 1 product.