Air Temperature and Humidity Sensor - Seeed Studio

A battery-powered, IP66-rated wireless air temperature and humidity sensor with measurement ranges from -40℃ to +85℃ and 0 to 100% RH, respectively. It features built-in Bluetooth and APP service for OTA configuration and remote device management. Ideal for smart agriculture applications, gardens smart and environmental monitoring solutions.

Compatible with LoRaWAN® networks worldwide

Compatible with different types of LoRaWAN® gateways for fast network connection (supports general frequency planes from 863MHz to 928MHz).

Long range and battery-powered

Provides ultra-wide transmission range of up to 2km in urban environments and 10km in direct line conditions. Powered by an easily replaceable standard lithium-thionyl chloride battery (model: ER34615) with a life of up to 10 years.

Designed for harsh environments

Operating temperature range of -40℃ to +85℃ and IP66-rated housing, suitable for outdoor use, UV exposure, heavy rain and dusty environments.

Simple configuration

SenseCAP offers a No-Code experience: configuration is completed in 4 steps via the SenseCraft app.

High Performance Guarantee

Subjected to 6 reliability tests before commercialization, it meets the requirements to perform flawlessly even in extreme conditions.

Dual-parameter monitoring

Simultaneously measures air temperature and humidity with high accuracy for comprehensive environmental monitoring.

The SenseCAP LoRaWAN S2101 Sensor measures air temperature and humidity with ranges from -40℃ to +85℃ and 0 to 100% RH (non-condensing), respectively, making it widely usable in various industrial environmental monitoring scenarios. It is specifically optimized for OTA update due to its built-in Bluetooth, which enables quick setup and update. With LoRa technology and IP66 design, this sensor ensures stability and reliability, offering long transmission range with low power consumption. Unlike wired devices, it is battery-powered, reducing the labor and complexity of installation-it can be assembled or disassembled in minutes.

The SenseCAP S210X is part of a series of LoRaWAN® wireless sensors designed for efficient and easy deployment environmental monitoring.

It can cover a transmission range of up to 2 km in urban environments and up to 10 km in line-of-sight conditions, maintaining low power consumption during the transmission process. It features a replaceable battery with a life of up to 10 years and an industrial IP66-rated enclosure. It supports an operating temperature range of -40 to +85℃, making it ideal for installation in harsh environments or subject to extreme weather conditions.

Guaranteed high performance

The sensors can operate in harsh outdoor conditions. To ensure that the performance and durability of the sensors meet their specifications throughout their lifecycle, the SenseCAP S210X series underwent 6 reliability tests before commercialization, passing all requirements to operate perfectly even in extreme conditions.

High and low temperature testing - verification of sensor performance under adverse thermal conditions.
Compliance testing - checking the consistency of values collected from multiple devices.
Waterproof test - verification of water resistance to ensure IP protection.
Freezing test - evaluation of operation in extremely low temperature environments.
Long distance communication testing - verification of transmission stability and absence of packet loss over long distances.
Research and production testing (R&D and manufacturing) - checking the success rate of devices under factory conditions.

Applications

Poultry farm, livestock barn, greenhouse, office, home, cold chain and warehouse.

SenseCAP S210X is compatible with LoRaWAN® V1.0.3 protocol and can work with Gateway - LoRaWAN Device - SenseCAP.

LoRaWAN® gateways can provide the LoRaWAN® network coverage needed to operate these sensors. The S210X can be connected to several LoRaWAN® gateways, and those provided by Seeed offer a complete and seamless user experience.

Helium network: sensors operate in areas covered by the Helium network (verifiable on Helium Explorer). You can check the SenseCAP M1 LoRaWAN Indoor Gateway - US915 - Seeed Studio and the SenseCAP M2 Light Hotspot and Software License - Seeed Studio.

LoRaWAN network: sensors also work on LoRaWAN® networks such as The Things Network, Loriot, Chirpstack, etc. You can refer to the SenseCAP Gateway - LoRaWAN EU915 - Seeed Studio and the SenseCAP Multi-Platform LoRaWAN Indoor Gateway SX1302 - US915 - Seeed Studio.

We recommend using SenseCAP M2 Multi-Platform LoRaWAN Gateway, a standard LoRaWAN® gateway that supports connection to multiple network servers. With its affordable price of $99, it is an extremely affordable solution, especially for those who wish to build a private LoRaWAN network.

SenseCraft Data Platform - Device, data and key management

• Seeed Studio IIoT Solutions offers a web service that allows users to manage SenseCAP devices and view data directly online.
• Manage and connect all devices with a single account
• Includes Dashboard, Device Management, Data Management and Access Key Management
• Provides MQTT and HTTP APIs for advanced developments
• SenseCraft App - Available for iOS and Android
• A powerful app for data visualization and remote device management.
• Time-saving: quick setup in just 4 steps
• Ease of use: designed even for those with little or no technical experience
• Data visualization on simple and intuitive interfaces
• Setting time intervals: improves battery efficiency
• Setting threshold values: focuses attention on important data - coming soon
• Sending alarms if data exceeds safe limits - coming soon

Package contains: 1 x Air Temperature and Humidity Sensor - Seeed Studio

Specifically, the kit includes:

• 1 x Sensor
• 2 x Bracket
• 1 x Quick Guide
• 4 x KA4*20mm Self Tapping Screws