All the nozzles in this set Bondtech CHT RepRap M6 (MOS) increase the fusing capacity of your hotend, allowing you to print faster and save time. They also improve the adhesion between layers of your 3D prints, creating stronger parts.
Features:
- Brass body
- Nickel coating
- 1 piece per package
- Available sizes: 0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.4, 1.8mm
- Optimized for 1.75mm filament
- Compatible with 2.85mm filament
- Requires 6mm wrench
Core Heating Technology is patented.
In Europe: Registration number EP3445568A1 - Publication date: 01-12-2021
In the United States: Registration number US11712847B2 - Publication date: 01-08-2023
3D printer nozzles made of metal, with one or more holes, designed to increase the standard circular surface area of heating walls.
Enhancements apply only to 1.75 / 2.85 mm rigid materials and 2.85 mm flexible filaments.
To achieve significant increases in volumetric flow, the use of nozzles with a minimum diameter of 0.6 mm is recommended.
Main advantages of Bondtech CHT
- Increased melting capacity due to increased heating wall surface area
- Affordable price
- Ultra-high precision machining
- Brass nozzle with nickel-plated surface
- Compliance with nozzle standards:
- RepRap (M6×1×7.5×12.5)
- MK8 (M6×1×5×13)
- Volcano (M6×1×14.5×21)
- Can be used with hotend 1.75 mm or 2.85 mm
Advantages of Bondtech CHT technology
The Bondtech CHT nozzles divide the filament into 3 thinner filaments, allowing the material to melt from the inside. As a result, melting occurs faster and higher flow rates can be used.
Advantages of nickel coating
A nickel coating is applied to coated brass nozzles to protect them from corrosion, erosion, and abrasion. Nickel-plated nozzles offer greater corrosion resistance and a lower coefficient of friction, providing smoother material feed and retarding plastic adhesion to the nozzle surface.
Nozzle sets for different materials
Different nozzle sets are recommended because:
Using different materials with the same nozzle causes buildup inside.
These deposits can cause clogging.
We recommend replacing the nozzle every time you change materials.
NOTICE: Avoid cold replacement of nozzles Bondtech CHT RepRap M6 (MOS)
Heat the heating block to 280 °C (or at least above 250 °C) before removing or tightening any Bondtech CHT nozzle.
Use a maximum torque of 1.5 Nm.
This Bondtech CHT nozzle is compatible with the following hotend/blocks:
- Mosquito® / Magnum
- Mosquito® Liquid
- Mosquito® Magnum+
- Copperhead™
- E3D Chimera and Kraken
- E3D V4, V5 and V6 blocks
- Prusa i3, Prusa Mini
- RepRap M6
- Hotend aftermarket Bambu Lab X1
Package contains: 1 x CHT M6 Coated Brass Nozzle - Bondtech
The size provided depends on the selection when ordering, can be: 0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.4, 1.8mm
