This Bondtech CHT BiMetal ™ MK8 nozzle increases the fusing capacity of your hotend, allowing you to print faster and save time. It also improves the adhesion between layers of your 3D prints, creating stronger parts.
It is important to note that this nozzle is resistant to abrasive materials loaded with particles or fibers.
See the tabs below with compatibility list and product warnings.
Features
- Copper body
- Hardened steel inserts
- Nickel coating
- 4 pieces per package
- Sizes included: 0.40, 0.60, 0.80, 1.0 mm
- Optimized for 1.75 mm filament
- Compatible with 2.85 mm filament
- Requires 6 mm wrench
Patented Core Heating Technology
In Europe: Registration number EP3445568A1 - Publication date: 01-12-2021
In the United States: Registration number US11712847B2 - Publication date: 01-08-2023
3D printer nozzles made of metal, with one or more holes designed to increase the standard circular area of the heating walls.
Advantages of the coated nozzle Bondtech CHT BiMetal ™ MK8
- Resistant to abrasive materials, ideal for composites with carbon and glass fibers
- Increased melting capacity due to increased heating wall surface area
- Increased flux (Flow Rate) between 25% and 65%.
- Excellent value for money
- Ultra-high precision machining
- Copper body with hardened steel inserts and nickel-plated surface
- Conforms to the nozzle standard: MK8 (M6×1×5×13)
- Can be used with hotend 1.75 mm or 2.85 mm
Note: Flow improvements may vary. Results depend on hardware, materials and print settings.
NOTICE: Cold replacement of BiMetal nozzles.
Copper is a soft material and does not withstand high mechanical stress.
Before removing or tightening any Bondtech CHT BiMetal nozzle, heat it to 280 °C (or at least above 250 °C).
Use a calibrated tool to limit the maximum torque to 1.5 Nm.
NOTICE: Measurement limitations for fiber-filled filaments.
For abrasive filaments loaded with wood, carbon fiber or fiberglass, use only 0.6, 0.8 or 1.0 mm nozzles.
NOTICE: For filaments loaded with particles.
For abrasive filaments loaded with metal, glitter or other particles, 0.4 mm or 0.5 mm nozzles can be used.
This nozzle Bondtech CHT is compatible with the following hotend/blocks:
- bq Hephestos
- Hephestos 2
- bq Prusa i3 Hephestos
- bq Witbox
- bq Witbox 2
- Craftbot Family
- Creality CR-10
- Creality CR-10-S4
- Creality CR-10-S5
- Creality CR-10S
- Creality Ender 2
- Creality Ender 3 Pro
- Creality CR-20 Pro
- Creality Ender 5
- Creality CR-10 V2
- Creality CR-6 SE
- Creality CR-10 Smart
- Creality Spider HT hotend (v2)
- Creality Spider HT & HF hotend (v3)
- Creality Spider Ceramic hotend (v4)
- MakerBot Replicator
- MakerBot Replicator 2
- MakerBot Replicator 2X
- Tevo Tornado
Package contains: 4 x CHT BiMetal MK8 Coated Nozzle - Bondtech (0.40, 0.60, 0.80, 1.0 mm)
