This Bondtech CHT BiMetal ™ RepRap M6 nozzle increases the fusing capacity of your hotend, allowing you to print faster and save time. It also improves the adhesion between layers of your 3D prints, creating stronger parts.
It is important to note that this nozzle is resistant to abrasive materials loaded with particles or fibers.
See the tabs below with compatibility list and product warnings.
Features
- Copper body
- Hardened steel inserts
- Nickel coating
- 1 piece per package
- Available sizes: 0.40, 0.60, 0.80, 1.0 mm
- Optimized for 1.75 mm filament
- Compatible with 2.85 mm filament
- Requires 6 mm wrench
Patented Core Heating Technology
In Europe: Registration number EP3445568A1 - Publication date: 01-12-2021
In the United States: Registration number US11712847B2 - Publication date: 01-08-2023
3D printer nozzles made of metal, with one or more holes designed to increase the standard circular area of the heating walls.
Advantages of the coated nozzle Bondtech CHT BiMetal ™ RepRap M6
- Resistant to abrasive materials, ideal for composites with carbon and glass fibers
- Increased melting capacity due to increased heating wall surface area
- Increased flux (Flow Rate) between 25% and 65%.
- Excellent value for money
- Ultra-high precision machining
- Copper body with hardened steel inserts and nickel-plated surface
- Complies with the nozzle standard: RepRap M6 (M6×1×7.5×12.5)
- Can be used with hotend 1.75 mm or 2.85 mm
Note: Flow improvements may vary. Results depend on hardware, materials and print settings.
NOTICE: Avoid cold replacement of nozzles Bondtech CHT BiMetal
Copper is a soft material and will not withstand high mechanical stress.
Before removing or tightening any Bondtech CHT BiMetal nozzle, heat it to 280 °C (or at least above 250 °C).
Use a calibrated tool to limit the maximum torque to 1.5 Nm.
NOTICE: Measurement limitations for fiber-loaded filaments
For abrasive filaments loaded with wood, carbon fiber or glass fiber, use only 0.6, 0.8 or 1.0 mm nozzles.
NOTICE: For filaments loaded with particles
For abrasive filaments loaded with metal, glitter or other particles you can use 0.4 mm or 0.5 mm nozzles.
This nozzle Bondtech CHT BiMetal is compatible with the following hotend/blocks:
- Mosquito® / Magnum
- Mosquito® Liquid
- Mosquito® Magnum+
- Copperhead™
- E3D Chimera and Kraken
- E3D V4, V5 and V6 blocks
- Prusa i3, Prusa Mini
- Nextruder with V6 adapter
- RepRap M6
- Hotend aftermarket Bambu Lab X1
Package contains: 1 x CHT BiMetal M6 Coated Nozzle - Bondtech
The size provided depends on the selection when ordering, can be: 0.40, 0.60, 0.80, 1.0 mm
