Key Features.
- Low thermal expansion for better pressure holding.
- Improved interlocking between heating block, nozzle and silicone cover to reduce interference during printing.
- Improved thermal insulation for superior air cooling detour.
- Unbeatable melting capacity for market-leading volumetric flow.
- Reduced mass for improved heat conduction and optimized thermal performance.
Standard FIN nozzle
Adopting the Standard Free and open-source Insulated Nozzle (FIN), an evolution of the renowned RepRap (V6) standard, Bondtech introduces the new CHT FIN nozzles.
With a 6 mm hex for easy replacement, the FIN standard introduces an innovative nozzle geometry that integrates with the silicone cover, completely insulating the 'hotend and protecting it from cold air and plastic.
Bondtech has embraced the FIN standard, offering its performance CHT nozzles in this new format.
Superior thermal performance
These low-mass nickel-plated copper nozzles are the ideal option for thehotend Mako, used on all compatible Bambu Lab 3D printers, when aiming for high speeds, maximum melting capacity and optimal volumetric flow.
Due to their excellent thermal conduction and heating performance, they are perfect for nonabrasive filaments, ensuring consistent, high-quality results with every print.
NOTICE: Avoid cold replacement of Bondtech CHT FIN nozzles.
Minimum recommended temperature for replacement: 270 °C.
Tighten the hot nozzle with the temperature ofhotend at least 10 °C above the intended printing temperature, up to a maximum of 300 °C.
The Bondtech CHT FIN nozzles are compatible with thehotend Mako when used on the following Bambu Lab 3D printers:
Package contains: 1 x Coated Copper CHT Nozzle FIN - Bondtech
The size provided depends on the selection when ordering, can be: 0.20, 0.40, 0.60, 0.80
