Printing Plate Satin Engineering 2-sided 330*320mm BLack Edition Bambu Lab H2C

Satin Engineering Black Edition is a print plate for 3D printers that falls between smooth and textured variants.

Suitable for the following Bambu Lab printer

• model H2C

Its finely powder-coated and slightly textured surface offers optimal adhesion, particularly suitable for materials such as PLA, TPU, PETG and PC (polycarbonate). This plate is compatible with a wide range of filaments, including TPU and ASA/ABS.

Key Features:

• Satin finish: provides excellent adhesion for versatile materials such as PLA, PETG, and TPU. Ideal for prints that need extra support.
• Versatility of filaments: compatible with materials such as ASA, PC Blend, TPU and more, but with some filaments the use of adhesives or brim is recommended.
• Easy adhesion and release: many prints come off on their own once cooled. For materials such as PLA/PETG, it may be necessary to flex the plate.
• Low maintenance: easy cleaning with 90% isopropyl alcohol and a microfibre cloth to keep the surface free of dust and grease.
• Durability: for prolonged printing with materials such as PC or PETG, the use of a protective adhesive barrier (e.g. glue stick) is recommended to avoid premature wear.

Advantages:

• Excellent adhesion for most materials.
• Self-levelling surface: the flexibility of the plate makes it easy to detach the print after cooling.
• Easy cleaning and maintenance.
• Broad compatibility with various filaments, from common ones such as PLA, to more complex material blends such as PC ABS.

Disadvantages:

• Z-offset: Live Z value may need to be adjusted when changing plate type.
• Satin coating wear: over time, the coating may wear due to nozzle cleaning in the non-printable area.
• Grease-sensitive: the surface must always be clean and free of grease to ensure proper adhesion.
• Need for protective adhesive for TPU and more demanding materials.

Care and maintenance:

• Clean with 90%+ isopropyl alcohol and a microfibre cloth.
• Remove prints only after complete cooling.
• Do not use sharp instruments to remove prints; the use of plastic spatulas is recommended.
• Do not use acetone or chemical cleaning agents

Considerations:

• Suitable for lighter magnets such as N38/N35, but not recommended for Voron Tap R8 with heavier magnets such as N52.
• Filaments such as filled PLA or ASA/ABS may require brim or reduced first layer speed to ensure good adhesion.
• The use of a protective layer when printing more abrasive materials such as loaded PC can extend the life of the plate.

Package contains: 1 x Satin Engineering 2-sided printing plate 330*320mmBLack Edition Bambu Lab H2C

The magnetic plate is to be purchased separately.