Added to your Project

We are open throughout the month of August, but with reduced staff. Our services will be fully operational again starting from 09/01/2025
assistant_photo

Worldwide express shipping

Language:
  • Italiano
  • Français
  • English
  • Español
  • Deutsch
Compass DHM projects

  • personSign in
  • Language:
    • Italiano
    • Français
    • English
    • Español
    • Deutsch

0

Shopping Cart

0
assistant_photo

Worldwide express shipping

PRODUCTS
  • Automatic Components
    Linear movement
    • Supports for shaft
    • nuts for shaft
    • Ground shaft
    • Shafts chromed
    • Shafts hardened
    • Shafts hardened and chromed
    • Linear guides
    • Guides SBR
    • Support units
    Bearings
    • Ball bearings
    • Ball bearings flanged
    • Ball bearing with bracket
    • Roller bearings
    Linear bushings
    • Linear bushings
      • Linear bushings closed
      • Linear bushings open
    • Linear bushings with flange
      • Linear bushings with round flange
      • Linear bushings with oval flange
      • Linear bushings with square flange
    • Linear bushings with housing units
      • Linear bushings with closed housing unit
      • Linear bushings with open housing unit
    • Bushings
    Couplings
    • End bearings and ball joints
    • Flexible joints
    • Rigid joints
    Pulleys
    • Toothed pulleys GT2
    • Toothed pulleys T2.5
    • Flat pulleys
    • Toothed pulleys GT3
    • Toothed pulleys 5 mm
    Belts
    • Belt GT2
    • Belt T2.5
    • Belt GT3
    • Belt T5
    • Belt S2M
    Trapezoidal screws
    • Trapezoidal screws T6
    • Trapezoidal screws T8
    • Trapezoidal screws T10
    • Trapezoidal screws T12
    • Trapezoidal screws T16
    Pneumatics
    • Pneumatic fittings
    • Pneumatic tubes
    Ball screws
  • Aluminum Extrusion and Brackets
    Series 3 (slot 5)
    Series 5 (slot 6)
    Series 6 (slot 8)
    Series 8 (slot 10)
  • Fasteners
    Screws
    • Grains
    • Hex head screws
    • Countersunk flat head screws
    • Cylindrical head screws
    • Pan head screws
    Nuts
    • Lock nuts
    • Hex nuts
    • Domed nuts
    • Square nuts
    Washers
    • Oversized washers
    • Flat washers
    Threaded rods
    Tools
    Spacers
    Magnets and magnetic Strips
    Wheels, feet, rollers and roller conveyors
    Transit & Equipment Cases
    Compartment Boxes
  • Materials
    Bars - Auctions
    • Stainless steel
      • Acciaio inox AISI 304
      • Acciaio inox AISI 316
      • Acciaio inox AISI 310
    Sheets - Plates
    • Aluminum
  • Robotics And Automation
    Motors
    • Nema 17
    • Nema 23
    • Hybrid stepping motor
    • Nema 34
    • DC Motors
    Motor driver
    Relays and switches
    • Microswitches and DIP switches
    • Relay
    • On/off switches
    • Buttons
    Power supplies
    Modules and card expansions
    • Arduino modules
    • Screens
    • Expansions
    Fans
    Parts for cards
    Control cards
    Arduino boards
    • Board
    • Shield
    Integrated computers and development boards
    • E-Textiles
    • Adafruit
    • SparkFun
    • Seeed studio
      • Grove
      • Cards
      • Wireless & IoT
      • Artificial Intelligence Hardware
      • Robotics
    • 3dsimo
    • Micro:bit
    • Raspberry Pi
      • HAT and accessories
      • Cards Raspberry Pi
    • nanoLambda
    • Mjbots
    Spies and warning lights
    Duet 3D
    Arduino compatible
    Thermal management
    • Fans - Thermal management
    • Peltier modules
    Sensors
    • Temperature sensors
    • Thermocouples
    • Extensometers
    • Motion sensors
    • Proximity sensors
    Video surveillance
    Batteries and Chargers
    Optoelectronics
    • Display
    • LED
    • Infrared sensors and photocouplers
    Semiconductors
    • Discrete semiconductors
    Passive components
    • Resistors / Resistors
    • Potentiometers and trimmers
    • Capacitors
    Batteries and Chargers
  • Wiring Components
    Cables
    • Single insulation cables
    • Cables Double insulation
    • Dupont cables
    • USB cables
    • Power cables
    • Test Leads
    Connectors and sockets
    • Sockets
    • PCB connectors
    • Terminal blocks
    • Power Connectors
      • Heavy Duty Power Connectors
      • Heavy Duty Power Connector Housings & Hoods
      • Heavy Duty Power Connector Contacts
    • Clogs
    • Test connectors
    • Terminals and Cable Lugs
    Collect Cables
    • Rigid chains
    • Spiral tube
    • Braided tube
    • Cable Trunking
    • Cable ties
    • Cable Holder Accessories
    • Rigid tube
    Heat shrink tubing
    Enclosures and accessories
    Cable glands, cable glands and fittings
    • Nuts and cable gland adapters
    • Cable Glands
    • Fittings
    Spiral sheath
  • 3D Printer Extruder
    Extruders
    • Titan
    • Hemera
    • QR Extruder
    • V2 Extruder
    • BMG-M Extruder
    • Upgrade kits Bondtech
    • BMG Extruder
    • BMG-X2-M Extruder
    • LGX Extruder
    • Extruders - DHM
    • Revo - Extruders
    • Extruders - BIQU
    • Vz-Extruder
    • Extruders - Phaetus
    Hot end
    • Titan Aqua
    • V6 - Hot end
    • Volcano - Hot end
    • SuperVolcano - Hot end
    • Titan Aero
    • Cyclops - Chimera
    • Lite 6
    • Prusa V6
    • Mosquito
    • Copperhead
    • Melters - DHM
    • Revo - Hot end
    • Phaetus - Melters
    • Vz-Hotend
    Accessories
    • Cartridges
    • Thermal adhesives
    • Fans - Extruder group
    • Push-fitting
    • Thermocouples
    • Spare parts - DHM
      • Clean nozzle
      • Fan support
      • Extruder upright
      • Other
      • Ultimaker
    • Fuser body
      • Fuser block
      • Fuser heatsink
    • Internal fuser duct
      • Conducted with PTFE
      • All metal duct
      • Capricorn tubes
    • Wire drive toothed pulleys
      • Drag stainless steel wire
      • Drag Brass wire
    • PTFE
    Nozzles
    • V6 - Nozzles
    • Volcano - Nozzles
    • Cyclops
    • SuperVolcano - Nozzles
    • Nozzles - DHM
      • Filament 1.75mm
      • Filament 3.00mm
    • Slice Engineering
    • Bondtech
    • Revo - Nozzles
    • Phaetus - Nozzles
    • MK8 - Nozzles
    • Dyze Design - Nozzles
    Brands extruder group
    • e3D
      • Nozzles - E3D
      • V6
      • Volcano
      • SuperVolcano
      • Titan - Aero - Aqua
      • Cyclops - Chimera
      • Lite 6
      • Prusa V6
      • Hemera
      • Accessories - E3D
      • Revo
    • DHM
      • Cartridges
      • Thermocouples
    • Slice Engineering
      • Accessories - Slice Engineering
      • Spare parts
      • Hotend
      • Nozzles - Slice Engineering
    • BondTech
      • Accessories - BondTech
      • Upgrade for BCN3D
      • Upgrade for Flashforge
      • Upgrade for Makerbot
      • Upgrade for Prusa
      • Extruders
      • Upgrade for Creality3D
      • Nozzles - BondTech
      • Upgrade for Ultimaker
      • Upgrade for Raise3D
      • Upgrade for Wanhao
    • BIQU
  • Build surface - 3D printer
    Heated plates
    • MK series tops
    • Silicone tops
    • Others heated plates
    Glasses
    • High temperature glasses
    • Borosilicate glasses
    High temperature tape
    • Polyimide tape
    • Other tapes
    • PET tape
    Magnetic planes and PEI
    Magigoo
    AprintaPro
    DimaFix
    EasyFix
    3DLAC
    LOKBUILD
    3dB
    Accessories - printing bed
  • Filaments And 3D Resins
    PLA
    • PLA AzureFilm
    • PLA Silk AzureFilm
    • PLA/PHA ColorFabb
    • PLA Economy ColorFabb
    • PLA TreeD Filaments
    • PLA Premium Formfutura
    • PLA EasyFil Formfutura
    • PLA Matt Formfutura
    • PLA Galaxy Formfutura
    • PLA SilkGloss Formfutura
    • rPLA Reform Formfutura
    Special PLA
    • Thermo PLA Formfutura
    • Wonderfil TreeD Filaments
    • PLA Volcano Formfutura
    • Specials PLA ColorFabb
    Loaded
    • Cork Fill Formfutura
    • Carbon Fill Formfutura
    • Specials ColorFabb
    • Carbon Fiber TreeD Filaments
    • Architectural TreeD Filaments
    • Stone Fill Formfutura
    • MetalFill Formfutura
    • WoodFill Formfutura
    • Carbon Luvocom Lehvoss
    • Glass fiber 3DXTech
    • Carbon 3DXTech
    PETG
    • PETG Azurefilm
    • PETG Economy ColorFabb
    • HDglass Formfutura
    • G-PET TreeD Filaments
    • PETG by DSM
    Co-polyesters
    • nGen ColorFabb
    • nGen_FLEX ColorFabb
    • XT ColorFabb
    • HT ColorFabb
    • nGen_LUX ColorFabb
    PP - Polypropylene
    • Centaur PP Formfutura
    • PP TreeD Filaments
    • Pegasus PP Ultralight Formfutura
    Eraser
    • Gomma Plastink
    • FlexiFil Formfutura
    • Flexible TreeD Filaments
    • Flexible by DSM
    • TPU ColorFabb
    • Python Flex Formfutura
    • Crystal Flex Formfutura
    • Flexible AzureFilm
    • Armadillo NinjaTek
    • NinjaFlex NinjaTek
    • Cheetah NinjaTek
    • Eel NinjaTek
    PA - Polyamide
    • PA ColorFabb
    • Nylon Formfutura
    • Nylon TreeD Filaments
    • Nylon by DSM
    • Nylon FiberForce
    • IGUS Iglidur
    • Luvocom Lehvoss
    • Nylon AzureFilm
    ASA
    • ApolloX Formfutura
    • ASA TreeD Filaments
    • ASA AzureFilm
    ABS
    • ABS Plastink
    • EasyFill ABS Formfutura
    • ABS TreeD Filaments
    • Premium ABS Formfutura
    • ABS PLUS AzureFilm
    Special ABS
    • TitanX Formfutura
    • ABSpro Formfutura
    • ClearScent Formfutura
    • Flame Retardant 3DXTech
    PC - Polycarbonate
    PVA and supports
    • AquaSolve Formfutura
    • PVA AzureFilm
    • Atlas Support Formfutura
    • Helios Support Formfutura
    • BVOH
    • USM - Universal Support Material
    • HTS - High Temperature Support
    HIPS
    • HIPS Formfutura
    • HIPS AzureFilm
    SKIN contact
    PEI - Polyetherimide
    PMMA
    PPSF & PSU - Polyphenylsulfone
    DPA
    • DPA ColorFabb
    ESD-Safe
    PE - Polyethylene
    PEKK & PEEK
    PVDF - Polyvinylidene fluoride
    Accessories - filaments
    • Filament storage
    • DimaFix
    • AprintaPro
    • Magigoo
    • EasyFix
    • MODIFI3D
    • 3DLAC
    Resins
    • Standard LCD Series
    • Standard SLA Series
    • Pulizia e accessori DLP/SLA
    • Dental LCD Series
    • Engineering SLA Series
    • Engineering LCD Series
    • Castable LCD Series
    • Tough and Durable LCD
    • Water-Washable LCD
    Brands Filaments and 3D Resins
    • FormFutura
      • Premium PLA
      • EasyFil PLA
      • ReForm rPLA (recycled)
      • Matt PLA
      • Galaxy PLA
      • Silk Gloss PLA
      • MagicFil Thermo PLA
      • Volcano PLA
      • Premium ABS
      • EasyFil ABS
      • ABSpro
      • ClearScent ABS
      • TitanX
      • ReForm rTitan (recycled)
      • ApolloX ASA
    • AzureFilm
      • PLA
      • PLA Silk
      • PETG
      • ABS PLUS
      • ASA
      • Flexible
      • Nylon
      • PVA
      • HIPS
    • ColorFabb
      • PLA/PHA
      • PLA Economy
      • PETG Economy
      • HT
      • XT
      • nGen
      • nGen_LUX
      • nGen_FLEX
      • PA-CF
      • TPU
      • WoodFill
      • GlowFill
      • CorkFill
      • Tough PLA
      • PA Neat
    • TreeD Filaments
      • Architectural
      • Carbon Fiber
      • G-PET
      • Nylon
      • PLA
      • PP
      • Wonderfil
      • ABS
      • ASA
      • Flexible
      • HIPS
      • PC
      • PMMA
      • Healtfil
    • FiberForce
      • Nylon
    • DSM
      • Arnite ID 3040 (PETP)
      • Arnitel ID 2045 (TPC)
      • Arnitel ID 2060-HT (TPC)
      • Novamid ID 1030 (PA6/66)
      • Novamid ID 1030-CF10 (PA6/66)
      • Novamid® AM1030 FR (PA6/66)
      • Novamid ID 1070 (PA6)
    • Ninjatek
      • Armadillo
      • Cheetah
      • NinjaFlex
      • Eel
    • Lehvoss
    • IGUS
      • IGUS Iglidur
    • 3DXTech
      • Unreinforced
      • Carbon Fiber
      • ESD-Safe
      • Glass fiber
      • Support
  • 3D printers
    3D printers FDM - FFF
    3D Resin Printers
    3D Printer Brands
    • Anycubic
    • Toolchanger - E3D Online
    • Phrozen
    • Prusa Research
    • Voron Design
    3D pens
    Thermoforming
    • FormBox - MAYKU Thermoforming 19410000 MAYKU
      FormBox - MAYKU
      Price €699.00

      Added to your Project

      Removed from your Project

    • Form Sheets 30 pack Thermoforming 19410002 MAYKU
      Form Sheets 30 pack
      Price €49.00

      Added to your Project

      Removed from your Project

  • Tailor-made Workings And Kits
    3D printing
    Arduino
    Voron
    • Voron 2.4
    • DHM Pro SERIES 5 - Slot 6mm - CUT TO MEASURE Structural profiles - anodized extruded aluminum profiles - 1
      SERIES 5 - Slot 6mm - CUT TO...
      Price €0.06

      Added to your Project

      Removed from your Project

    • DHM Pro SERIES 6 - 8mm slot - CUT TO MEASURE Structural profiles - anodized extruded aluminum profiles - 1
      SERIES 6 - 8mm slot - CUT TO...
      Price €0.43

      Added to your Project

      Removed from your Project

    • DHM Pro SERIES 8 - Slot 10mm - CUT TO MEASURE Structural profiles - anodized extruded aluminum profiles. - 1
      SERIES 8 - Slot 10mm - CUT TO...
      Price €0.49

      Added to your Project

      Removed from your Project

    • Aluminium sheet - CUT TO MEASURE - Industrial material plates Aluminum lastreALU DHM Pro
      Aluminium sheet - CUT TO MEASURE...
      Price €1.10

      Added to your Project

      Removed from your Project

    • Chromium plated hardened shafts - CUT TO MEASURE - ground hardened and chromium plated steel Shafts hardened and chromed alb-...
      Chromium plated hardened shafts...
      Price €0.49

      Added to your Project

      Removed from your Project

    • Chromed shafts - CUT TO MEASURE - ground and chromed steel Shafts chromed alberi-crom DHM Pro
      Chromed shafts - CUT TO MEASURE...
      Price €0.49

      Added to your Project

      Removed from your Project

    • Ground shafts - CUT TO MEASURE - ground steel Ground shaft alberi-rett DHM Pro
      Ground shafts - CUT TO MEASURE -...
      Price €0.37

      Added to your Project

      Removed from your Project

    • Hardened shafts - CUT TO MEASURE - hardened and ground steel Shafts hardened alberi-temp DHM Pro
      Hardened shafts - CUT TO MEASURE...
      Price €0.61

      Added to your Project

      Removed from your Project

    • Aluminum sheet - CUT TO MEASURE - high precision ground aluminum plates 5083 Aluminum 1805026-b DHM Pro
      Aluminum sheet - CUT TO MEASURE...
      Price €1.22

      Added to your Project

      Removed from your Project

    • SERIES 5 - Slot 6mm - CUT TO MEASURE - Structural profiles in BLACK anodized aluminium.
      SERIES 5 - Slot 6mm - CUT TO...
      Price €1.22

      Added to your Project

      Removed from your Project

    • SERIES 3 - Hollow 5mm - CUT TO MEASURE Structural profiles 15x15 - anod extruded aluminum profiles. Series 3 (slot 5) 1805030...
      SERIES 3 - Hollow 5mm - CUT TO...
      Price €1.22

      Added to your Project

      Removed from your Project

  • MANUFACTURERS
    #ABCDEFGHILMNOPQRSTW
    #
    • 3D Simo
    • 3dB
    • 3DLAC
    • 3DXTech
    A
    • Adafruit
    • Anycubic
    • AprintaPRO
    • Arduino
    • AzureFilm
    B
    • Bigtreetech
    • Biqu
    • Bocchiotti
    • Bondtech
    C
    • Capricorn
    • Cembre
    • Chaoticlab
    • ColorFabb
    • Creality
    D
    • DHM
    • DHM Pro
    • DIMAFIX
    • DSM
    • Duet3D
    • Dyze Design
    E
    • E3D Online
    • Ember Prototypes
    F
    • F3D-Racing UG
    • Fabreeko
    • Fenner Inc._NINJATEK
    • FiberForce
    • Formfutura
    • Fotek
    G
    • Gates
    • Gdstime
    • Gewiss
    H
    • Hikvision
    I
    • IGUS
    • Ilme
    L
    • Lehvoss
    • Logitech
    • LOKBUILD
    M
    • Magigoo
    • MAYKU
    • MEAN WELL
    • Mellow 3D
    • Micro:bit
    • MODIFI3D
    N
    • nanoLambda
    • Nanuk
    • Nevermore
    • NWK
    O
    • Omron
    P
    • Phaetus
    • Phrozen
    • Prusa Research
    Q
    • Qtech
    R
    • Raspberry Pi
    S
    • SeeedStudio
    • Slice Engineering
    • SparkFun
    • STEPPERONLINE
    • Sunlu
    • Synco Lube
    T
    • TreeD Filaments
    W
    • Wago
    • Wantai
    • Manufacturer - Arduino
    • Manufacturer - Slice Engineering
    • Manufacturer - DHM Pro
    • Manufacturer - Duet3D
    • Manufacturer - E3D Online
    • Manufacturer - Bondtech
  • Online services
    • Configurable components
    • Project Manager
    • Technical Resources
    • Advanced Search
    • Product comparison
    • Advanced price / availability management
    • Basket Save and Share
    • Quick Order
    • FAQ

    What are configurable mechanical components?

    Configurable components are products in which you can select specific design features, and see the price and delivery times at a glance.

    The most used configurators include linear shafts, linear guides, miniature linear guides, aluminum extrusions and aluminum sheets. Select your specifications from material, surface treatment, length and diameter.

    Tailor-made processing

    Our “DHM projects” tool allows you to save different projects or lists of articles on our website and sort them when it suits you. You can easily add them to your cart by clicking the "Add Project to Cart" button, or you can quickly edit them by removing and adding products from any device by logging into your account.

    You can also share projects in various ways. You can submit a read-only copy and the person you shared the project with can order directly on our website. For more details, go to your projects and click the “Share Project” link.

    Alternatively, you can export the project to PDF or CSV so that you can always consult, even offline, the detailed list of products of your project.

    It is also possible to make your project public on the dedicated page of our site, so that everyone can take inspiration for automation applications, 3D printing, IoT ...

    A single point to find insights, application tips, videos, technical articles and tutorials, but not only, to support you during the development of your projects.

    Thanks to the advanced search, browsing the categories and products of the DHM-online site is much easier. In fact, the advanced search allows you to search through filters by restricting the number of compatible components to your needs until you find what you were looking for.

    The product comparison tool allows you to select up to 3 products at a time to compare. On the dedicated page you can compare the information and specifications of the selected products in a side-by-side format, simplifying the identification of similarities and differences between products.

    Items can be easily removed or added to the cart by clicking on the appropriate button. Find out more

    Nous avons rendu encore plus facile la vérification de la disponibilité des stocks et des prix, ainsi que l'achat de produits.

    Sur chaque page produit, comme dans le panier avant de conclure la commande, vous pouvez vérifier l'inventaire en temps réel de l'article, avec le timing du matériel et les détails spécifiques concernant le traitement, le cas échéant.

    Sont également indiqués les stocks pouvant être achetés en rupture de stock avec les délais relatifs aux arrivages et à la gestion par l'usine de fabrication.

    DHM now offers you the option to save and share your cart. This way you can save the products for a future order, or forward your shopping cart to a colleague to place the order. You can also save multiple carts. For all the details, log into your cart and click on the "Share" or "Save" icon. You must be logged in to your account to be able to save your carts.

    From the page dedicated to quick orders, you can quickly proceed with the order of all the products you need at once.

    Just enter the store product code (reference - SKU), title, variant and quantity required. Click on "add to cart" and you will be ready to complete the purchase.

    Alternatively, you can upload the product list (BOM): upload an Excel, CSV or tab-delimited file, with the title or product code and the desired quantity. You will find the example file on the dedicated page.

    If you need support, assistance or need more information about a product, order or online service, we are at your disposal. In the Frequently Asked Questions (FAQ) section, you will easily find quick answers to the most common questions regarding orders, the account, the catalog and more. In addition, on each product page you can submit a specific request for technical support.

  • New Products
  • Offers
  • Clearance
  • Help
  • Contact Us
  • Advanced Comparison
  • Blog
Menu
  • My DHM
  • +
    Products
    • +
      Mechanical components
      • Linear movement
      • Bearings
      • Linear bushings
      • Couplings
      • Pulleys
      • Belts
      • Trapezoidal screws
      • Pneumatics
      • Ball screws
    • +
      Profiles structural and accessories
      • Series 5 (slot 6)
      • Series 6 (slot 8)
      • Series 8 (slot 10)
      • Series 3 (slot 5)
    • +
      Hardware and Screws
      • Threaded rods
      • Tools
      • Screws
      • Magnets and magnetic Strips
      • Spacers
      • Nuts
      • Washers
      • Wheels, feet, rollers and roller conveyors
      • Transit & Equipment Cases
      • Compartment Boxes
      • Nails and rivets
      • Safety rings and cotter pins
    • +
      Industrial material
      • Sheets - Plates
      • Bars - Auctions
      • Corner pieces
    • +
      Robotics and Automation
      • Motor driver
      • Relays and switches
      • Power supplies
      • Modules and card expansions
      • Fans
      • Parts for cards
      • Control cards
      • Arduino boards
      • Integrated computers and development boards
      • Spies and warning lights
      • Duet 3D
      • Arduino compatible
      • Optoelectronics
      • Passive components
      • Thermal management
      • Video surveillance
      • Sensors
      • Batteries and Chargers
      • Semiconductors
      • PCB Prototyping
      • Motors
      • Data storage and connectivity
    • +
      Electrical equipment
      • Cables
      • Connectors and sockets
      • Collect Cables
      • Heat shrink tubing
      • Enclosures and accessories
      • Spiral sheath
      • Cable glands, cable glands and fittings
      • Fuses & Circuit Breakers
    • +
      Extruder group - 3D printing
      • Brands extruder group
      • Nozzles
      • Extruders
      • Hot end
      • Accessories
    • +
      Print bed - 3D print
      • Heated plates
      • Glasses
      • High temperature tape
      • Soft
      • Clips
      • Accessories - printing bed
      • AprintaPro
      • Magigoo
      • DimaFix
      • EasyFix
      • LOKBUILD
      • 3dB
      • 3DLAC
      • Magnetic planes and PEI
    • +
      Filaments and 3D Resins
      • PLA
      • Special PLA
      • Loaded
      • PETG
      • Co-polyesters
      • PP - Polypropylene
      • Eraser
      • PA - Polyamide
      • ASA
      • ABS
      • Special ABS
      • PC - Polycarbonate
      • PVA and supports
      • HIPS
      • SKIN contact
      • PEI - Polyetherimide
      • PMMA
      • PPSF & PSU - Polyphenylsulfone
      • Accessories - filaments
      • Resins
      • Brands Filaments and 3D Resins
      • DPA
      • PEKK & PEEK
      • PE - Polyethylene
      • PVDF - Polyvinylidene fluoride
      • ESD-Safe
      • PACKS
    • +
      3D printers
      • 3D printers FDM - FFF
      • 3D Resin Printers
      • 3D Printer Brands
      • Thermoforming
      • 3D pens
    • +
      Tailor-made workings and kits
      • 3D printing
      • Arduino
      • Tailor-made processing
      • Voron
      • VzBoT
    • Gift Cards
    • CLEARANCE
  • Manufacturers
  • DHM online services
  • New Products
  • Prices Drop
  • My Projects
  • Blog
  • Contact Us
  • Help
  1. Home
  2. 3D printers
  3. 3D printers FDM - FFF
  4. Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB
  • Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002
  • Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002
  • Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002
  • Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002

Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002

Add to Compare
 Product Sheet
Please login to Download PDF
Add to Project

Added to your Project

Removed from your Project

Create new project

Create

New Project successfully created

Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB

19780002
€2,682.78

Added to your Project

Removed from your Project

VAT included Shipping excluded
Europe Warehouse
Processed within 15 working days
Quantity :
-- Stocks: Immediate Availability *
*Regular shipments throughout the country
  • Product Details
    19780002
    -- Stocks: Immediate Availability *
    *Regular shipments throughout the country
  • Description

    Product features:

    • Multi-material 3D printing with dual nozzles
    • Optional 10W/40W laser and cutting module
    • Print volume of 350×320×325 mm³
    • Optical motion calibration with 5 μm resolution
    • Closed-loop servo extruder
    • Nozzle at 350°C and active chamber heating at 65°C

    Real-time spatial alignment - Get what you see

    The H2D's BirdsEye camera, combined with computer vision algorithms, provides top-down alignment accuracy down to 0.3 mm. This advanced spatial alignment system allows users to position the tool path accurately on the material, providing a true "what you see is what you get" experience.

    Automatic presetting - Optimize material efficiency and minimize waste

    Taking advantage of real-time images from the BirdsEye camera, Bambu Suite can automatically arrange your design based on the shape of the material, such as a piece of plywood left over from the previous design. This feature helps you make the most of each material.

    Ultra-fine motion accuracy of 50 µm*

    An ultra-fine vision encoder plate, combined with 5-µm resolution optical measurements to track and correct tool head motion, enables the H2D to achieve a distance-independent motion accuracy of 50 µm over the entire work area, an order of magnitude higher than its predecessor. (*Vision Encoder sold separately)

    Extra-sized work area - No constraints dictated by size

    With a print volume of up to 350×320×325 mm, creating large-scale designs has never been easier. Printing oversize models with the printer's larger capacity allows you to bring even your most ambitious ideas to life.

    Hotend at 350°C and chamber heating up to 65°C - Harness the full potential of high-performance materials

    Equipped with active chamber heating up to 65°C and a high-temperature hotend that reaches 350°C, the H2D provides extremely precise closed-loop thermal control. This advanced system effectively eliminates warping and warping in high-performance materials, ensuring optimal adhesion between layers and maximizing the potential of the materials used.

    Hotend With high effective throughput - Print at a constant speed of 600 mm/s with ease

    H2D's specially designed high-flowhotend ensures reliable high-speed printing up to 600 mm/s. Optimized for consistent performance, it eliminates flow restrictions during printing, enabling continuous, uninterrupted extrusion, regardless of model size or complexity.

    DynaSense extruder - Intelligent sensing for precise extrusion control

    Bambu Lab's proprietary permanent magnet synchronous servomotor (PMSM)-based architecture implements an intelligent extrusion management system. It performs torque, resistance and position sampling at 20 kHz by dynamically modulating the electromagnetic torque vectors. This helps stabilize extrusion and detect any filament jams or grinding.

    Nozzle camera - Extrusion monitoring at the nozzle tip

    The H2D printer is equipped with a nozzle camera with artificial intelligence and macro optics. This intelligent monitoring system continuously tracks extrusion patterns, immediately detecting material buildup, filament deviations and extrusion problems.

    AI-based pre-press checklist - Peace of mind, every time you print

    Before each operational cycle, the H2D printer's vision system checks a series of points based on a checklist. 1. Chamber integrity scanning technology detects any debris on the entire printing surface. 2. Hardware configuration verification instantly recognizes nozzle size and print plate properties. 3. Digital-physical alignment automatically verifies consistency between detected hardware specifications and active slicer parameters.

    SOTA filament monitoring - 15 sensors on a single filament path.

    Unlike conventional systems with a single filament depletion detector, the H2D offers complete material flow monitoring. Along the path from the AMS to the nozzle, 15 strategic sensors form an intelligent network that constantly tracks five key parameters: feed rate, tension, filament tip position, extruder thermal environment, and dynamic extrusion pressure. This state-of-the-art system provides unprecedented control over filament behavior.


    The package contains: 1 x Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB

    Specifically included in the package is:

    1 x Bambu Lab H2D

    1 x Textured PEI plate

    1 x Coil holder

    1 x Accessory box

    1 x AMS 2 Pro

    1 x Security key

  • Read more

    Technical Specifications

    Article Specification
    Printing Technology Fused deposition modeling
    Body Build volume (W×D×H) Single-nozzle printing: 325×320×325 mm³
    Dual-nozzle printing: 300×320×325 mm³
    Total volume for two nozzles: 350×320×325 mm³
    Frame and Shell Aluminum, Steel, Plastic and Glass
    Laser Safety Windows Installed on the Laser version, The regular H2D can be upgraded through the Laser upgrade kit
    Air Assist Pump Included with the Laser Edition, the standard H2D can be upgraded through the Laser Upgrade Kit.
    Dimensions Dimensions 492 x 514 x 626 mm³ (Package dimensions: 620 x 620 x 755 mm³)
    Net Weight 31 kg
    (Gross weight: H2D: 38.5 kg; H2D AMS Combo: 42.3 kg;
    H2D Laser Full Combo: 46.2 kg)
    Tool head Hotend Full metal
    Extruder gear Hardened steel
    Nozzle Hardened steel
    Maximum nozzle temperature 350 °C
    Nozzle diameter included 0.4 mm
    Nozzle diameter supported 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm

    For more information please contact us.

    The item you will receive may differ in some features from the one depicted in the photo, depending on the production batch. Despite this, the functionality is maintained.

  • Attachments
    Bambu Lab H2D TDS

       Download (2.04M)

    Bambu Lab H2D TDS

  • Video
  • Questions(FAQs)
      Are the left and right hotends the same?

      Yes. The left and right hotends are identical in structure and materials, so they can be used interchangeably.


      How many AMS 2 Pro and AMS HT units can the H2D printer support? How many colors can it print with?

      The H2D printer supports up to 4 AMS 2 Pro units and 8 AMS HT units connected simultaneously, for a total of 12 units and 24 material slots.

      Since the H2D is equipped with two hotends, in the most extreme scenario, all AMS units can be connected to one hotend, while the other uses an external spool holder.

      With this setup, the printer can support and print with up to 25 colors.


      Is the H2D printer compatible with the first-generation AMS system?

      The first-generation AMS system is fully plug-and-play compatible and can be used with the H2D printer for multi-color printing. However, its drying function is not supported.

      Due to fundamental differences in the loading mechanism and buffer structure, the H2D printer does not support the AMS Lite system.


      The AMS 2 Pro connects directly to the printer via 6-pin ports. So what are the two 4-pin ports on the back of the printer for?

      The two 4-pin ports on the back are intended for future expansion accessories.

      For example, to upgrade a non-laser version of the printer to the laser version, one of these ports can be used to connect an external air pump.


      Can I use the A1 series hotend on the H2D printer? And vice versa, can H2D hotends be used on A1 series printers?

      Although the H2D printer's hotend has a similar structure to that of the A1 series, they are not perfectly identical.

      The H2D hotends are specifically designed for that model, offering maximum compatibility. For example, they support a higher maximum volumetric flow rate, reduce the risk of clogging, and allow for more precise nozzle offset calibration between the left and right hotends. They also enable automatic hotend type recognition via the real-time camera.

      Therefore, to ensure optimal print quality, it is strongly recommended not to use A1 hotends on the H2D printer.

      You can use H2D hotends on A1 series printers, but you must also use the H2D-specific silicone sock for proper compatibility.


      Is a USB flash drive included by default? What features are affected if no USB drive is inserted?

      No, a USB flash drive is not included by default.

      You can still start prints normally without a USB drive, as the printer has built-in storage for executing print files.

      However, the absence of a USB drive affects the following features:

      Time-lapse recording and photo capture cannot be enabled.

      Printing via LAN is not possible.

      Sending print files to the printer for storage through the project interface is disabled.

      Log file export is not supported.

      USB Requirements:

      USB 2.0 or higher protocol

      Minimum write speed: over 10 MB/s

      Supported file systems: FAT32 and exFAT

      Only one USB drive is supported; USB hubs or multiple drives are not compatible.


      Why can’t I freely select the hotend for printing with preloaded files on the printer?

      The hotend used for printing is determined during the slicing process of the model file.

      For preloaded models, the correct hotend is already selected at this stage, so it cannot be changed directly from the printer’s screen.

      When slicing a file in Bambu Studio and sending it to the printer, you can choose to use the left or right hotend.

      For certain materials, such as TPU and PPS/PPA-CF, it is recommended to use specific hotends for optimal print quality.

      For more information on filament compatibility with the H2D printer, please refer to the corresponding wiki page.


10 Similar Products:

Bambu Lab P1SC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780000Bambu Lab P1SC Combo 3D Printer with AMS - BAMBULAB
    Bambu Lab P1SC Combo 3D Printer with AMS - BAMBULAB
    €1,035.78Price

    Added to your Project

    Removed from your Project

    Europe Warehouse
    Prusa CORE One 3D Printer 3D printers FDM - FFF 1950002-a Prusa ResearchPrusa CORE One 3D Printer
    • New
      Prusa CORE One 3D Printer
      €1,483.90Price

      Added to your Project

      Removed from your Project

      Europe Warehouse
      Original Prusa MK4S 3D Printer 3D printers FDM - FFF 1950000-b Prusa ResearchOriginal Prusa MK4S 3D Printer
        Original Prusa MK4S 3D Printer
        €1,208.90Price

        Added to your Project

        Removed from your Project

        Europe Warehouse
        Original Prusa MINI+ Kit 3D printers FDM - FFF 1950001-b Prusa ResearchOriginal Prusa MINI+ Kit
          Original Prusa MINI+ Kit
          €583.00Price

          Added to your Project

          Removed from your Project

          Europe Warehouse
          PEEK-300 3D Printer - CreatBot 3D printers FDM - FFF 19850002 CreatBot
          • New
            PEEK-300 3D Printer - CreatBot
            €17,078.78Price

            Added to your Project

            Removed from your Project

            Europe Warehouse
            D1000 HS 3D Printer - CreatBot 3D printers FDM - FFF 19850000 CreatBot
            • New
              D1000 HS 3D Printer - CreatBot
              €43,419.80Price

              Added to your Project

              Removed from your Project

              Europe Warehouse
              3D Printer D600 Pro2 HS - CreatBot 3D printers FDM - FFF 19850001 CreatBot
              • New
                3D Printer D600 Pro2 HS - CreatBot
                €19,337.00Price

                Added to your Project

                Removed from your Project

                Europe Warehouse
                Bambu Lab X1CC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780001Bambu Lab X1CC Combo 3D Printer with AMS - BAMBULAB
                  Bambu Lab X1CC Combo 3D Printer with AMS - BAMBULAB
                  €1,592.10Price

                  Added to your Project

                  Removed from your Project

                  Europe Warehouse
                  ToolChanger & Motion System Bundle inc Tools & Hemera Extruders - E3DToolChanger & Motion System Bundle inc Tools & Hemera Extruders - E3D
                    ToolChanger & Motion System Bundle inc Tools & Hemera Extruders - E3D
                    €3,899.00Price

                    Added to your Project

                    Removed from your Project

                    Immediate Availability
                    PEEK-250 3D Printer - CreatBot 3D printers FDM - FFF 19850003 CreatBot
                    • New
                      PEEK-250 3D Printer - CreatBot
                      €14,638.78Price

                      Added to your Project

                      Removed from your Project

                      Europe Warehouse
                      arrow_back
                      arrow_forward
                      Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002
                      
                        Images
                      • Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002
                      • Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002
                      • Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002
                      • Bambu Lab H2DC Combo 3D Printer with AMS - BAMBULAB 3D printers FDM - FFF 19780002
                      
                      International Shipping

                      +50 000 products

                      FAQ - Support PRO

                      Loyalty Program

                      Featured FAQs  
                      • What are the payment options?
                      • How much are the shipping costs?
                      • Request a quote
                      • The advantages of having an account
                      • Product availability
                      • Register an Account
                      • Pick up by hand
                      • Electronic invoicing
                      • Did you have a problem with your order?
                      • My projects
                      Our company
                      • Who we are
                      • Terms and conditions
                      • Collaborations
                      • Schools and Universities
                      • Privacy
                      • NDA
                      • Affiliate Program
                      • Contact us
                      • FAQ
                      • Catalogs
                      account
                      • Personal info
                      • Orders
                      • Credit notes
                      • Addresses
                      • Vouchers
                      • My alerts
                      IN EVIDENCE
                      
                      • Linear movement
                      • Ball screws
                      • Arduino boards
                      • Extruder group - 3D printing
                      • Heated plates
                      • Collect Cables
                      • Filaments and 3D Resins
                      • Tailor-made processing
                      • 3D printers
                      • Gift Cards

                      Newsletter

                      You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.

                      Control your Privacy

                      When you visit any website, it may store or retrieve information on your browser, mostly in the form of 'cookies'. This information, which might be about you, your preferences, or your internet device (computer, tablet or mobile), is mostly used to make the site work as you expect it to.

                      More info
                      Necessary
                      Statistics
                      Marketing
                      Hide details Show details
                      • Necessary (1)
                      • Statistics (1)
                      • Marketing (3)
                      • Cookie Policy
                      • Necessary

                        Necessary cookies help make a website usable by enabling basic functions like page navigation and access to secure areas of the website. The website cannot function properly without these cookies.

                        Name Provider What it does Expiry Allow (Check all)
                      • Statistics

                        Statistic cookies help website owners to understand how visitors interact with websites by collecting and reporting information anonymously.

                        Name Provider What it does Expiry Allow (Check all)
                      • Marketing

                        Marketing cookies are used to track visitors across websites. The intention is to display ads that are relevant and engaging for the individual user and thereby more valuable for publishers and third party advertisers.

                        Name Provider What it does Expiry Allow (Check all)
                      Control your Privacy
                      Add to Cart
                      My Account
                      Scroll Top
                      Bank transfer
                      Cash on delivery
                      Paypal
                      Visa
                      MasterCard
                      Maestro
                      Hype
                      Satispay
                      UnionPay
                      MyBank

                      © 2012-2025 Compass DHM projects - P.IVA IT04879160283 - All rights reserved

                      /
                      /