Typhoon LCX & Typhoon Air High-Flow Extruders - Dyze Design

Greater Scope. Faster Printing.

Typhoon is described as a high-flow, fast-printing extruder, a unique 3D print head specifically designed for large-format industrial 3D printers.
This head is designed to extrude 2.85 mm filament, is compatible with standard firmware, and can deliver a flow rate of about 200 mm³/s (0.9 kg/h). This means faster prints with a high deposition rate.

Super High Flow Rate

The Typhoon™ extruder can deliver up to 200 mm³/s (0.9 kg/h), one of the highest flow rates per 2.85 mm filament.

Quad Pinch System

The "quad pinch" system ensures four points of contact with the filament. This extreme grip ensures that slippage never occurs. Any type of filament can pass through this mechanism, even the softest and most flexible ones.

Dual Heating Zone

The dual heating zone design keeps the polymer at a constant temperature:

• the upper section receives the cold filament and heats it until it melts;
• the lower zone stabilizes the polymer at a precise temperature, ensuring an even flow.

Non-Planar 3D Printing

Same Typhoon, different heatcore: The non-planar version offers more space around the nozzle, making it easier to print non-planar paths. It can also be mounted on a robotic arm, expanding printing possibilities.

Precise Temperature Control

The two PT100 sensors are class A, high-precision. The circuit is designed to offer the best resolution between 0°C and 500°C.

Super Tough Transition Tube

The new transition tube design takes advantage of the low thermal conductivity of titanium combined with the rigidity of a large tube. The processing is highly complex and performed by a specialized manufacturer.

Changeover Rapido Heatcore

Each heatcore can be easily replaced with a few turns of the knob. The tapered assembly ensures solid contact with the structure.

Fast Filament Change

The top lever moves all drag mechanisms away from the filament, enabling a change in seconds.

Powerful NEMA23 Motor

The NEMA23 motor can handle high flows smoothly. The thrust system is capable of applying up to 20 kg of force.

Air or Liquid Cooling

The Typhoon is available in two versions:

• Typhoon Air, which keeps the cold zone at the right temperature via a fan;
• Typhoon LCX, ready for any environmental condition thanks to the liquid cooling circuit, which ensures a constant temperature even in heated chambers.

Hardened Steel Nozzle

Super abrasion-resistant nozzle prevents any change in diameter or height during large prints with abrasive filaments.

Ultra-Resistant

The all-metal frame, made of aluminum alloy, is designed to withstand high stress under harsh conditions.

4.6:1 Steel Gears

The gears are made of alloy steel and heat-treated for long life. Each gear is mounted on robust ball bearings, reducing friction losses and ensuring smooth operation.

Print any type of plastic

The Typhoon extruder can print any type of 2.85 mm plastic filament currently available on the market.

Package Contains: 1 x Typhoon LCX & Typhoon Air High-Flow Extruders - Dyze Design