8-in-1 Compact Weather Station - Seeed Studio

The SenseCAP S800 sensor measures: air temperature, relative humidity, barometric pressure, wind speed, wind direction (ultrasonic), PM2.5, PM10 and noise. It is ideal for applications in harsh environments such as outdoors, agriculture or smart cities.

Measurement of 8 Parameters

Measures air temperature, relative humidity, barometric pressure, wind speed, wind direction, PM2.5, PM10 and noise in one compact sensor.

Industrial Level Design

Operating temperature -40°C to +85°C IP66 certification: water and dust resistant, suitable for outdoor scenarios

Output Interface

RS485 (MODBUS-RTU) / SDI-12

Thermostatic Heating System

Independent power supply for use in extremely cold environments.

Powerful Components Included

3 m cable for pole mounting; radiation shields to ensure accurate environmental measurements; ultrasonic wind speed and direction sensors with no moving parts.

High Performance Guarantee

The SenseCAP ONE S800 has passed 6 reliability tests before release, ensuring flawless performance even in extreme weather conditions.

Features

• Measurement of 8 Parameters: measures air temperature, relative humidity, barometric pressure, wind speed, wind direction, PM2.5, PM10 and noise in one compact sensor.
• Industrial Level Design: operating temperature from -40°C to +85°C; IP66 certification, water and dust resistant, suitable for outdoor scenarios.
• Output Interface: RS485 (MODBUS-RTU) / SDI-12.
• Thermostatic Heating System: independent power supply to ensure proper operation in extremely cold environments.
• Powerful Components Included: 3 m cable for pole mounting; radiation shields for accurate environmental measurements; ultrasonic wind speed and direction sensors with no moving parts.
• High Performance Guarantee: the sensor has passed rigorous reliability tests to ensure excellent performance even under extreme conditions.

The sensors can operate in harsh outdoor environmental conditions.
To ensure that performance and durability remain in accordance with specifications throughout the entire lifecycle, SenseCAP ONE series sensors underwent 6 reliability tests before they were released to the market, meeting all requirements to perform flawlessly even in extreme conditions.

• Wind tunnel for wind calibration
• High and low temperature test - determines the performance of the device under extreme thermal conditions.
• Structural testing - checks the consistency of values collected from multiple devices.
• Vibration test on x-y-z axes.
• Waterproof and airtightness testing.
• Research and production testing - evaluates the success rate of multiple devices under factory conditions.

Application

Today, localized weather data, known as microclimates, is the new frontier for more precise and accurate weather forecasts. As a result, weather data collection is becoming increasingly detailed and distributed over grids. In this context, weather sensors, the most practical means of collecting these data, are experiencing an increase in demand.

The SenseCAP ONE S800 is a compact 8-in-1 weather sensor that enables the collection and monitoring of environmental and meteorological data, which is critical in various application scenarios such as smart city projects, smart agriculture and more. The device is IP66 certified and designed to withstand even the harshest outdoor environments. It measures wind speed and direction using ultrasonic technology, avoiding traditional mechanical 3-cup or vane anemometers; this reduces moving parts, making the sensor less prone to failure and easier to maintain without compromising accuracy or reliability.

SenseCAP ONE sensors integrate multiple detectors into one compact device, monitoring up to ten meteorological parameters: air temperature, humidity, atmospheric pressure, light intensity, wind speed, wind direction, precipitation, PM2.5, PM10 and CO₂.

The SenseCAP ONE series uses the RS485 (MODBUS-RTU) / SDI-12 communication protocol. Therefore, the SenseCAP ONE compact weather sensor can be used with any data logger that supports RS485 (MODBUS-RTU) / SDI-12.

The SenseCAP S2100 - LoRaWAN® Data Logger - Seeed Studio and the Sensor Hub, a 4G industrial data logger with MODBUS-RTU RS485 protocol - Seeed Studio, suitable for SenseCAP ONE series weather sensors. These devices allow sensor data to be transmitted to public LoRaWAN® network servers (such as Helium, TTN, etc.) or to private servers.

The package contains: 1 x 8-in-1 Compact Weather Station - Seeed Studio.

Specifically, the kit includes:

• 1 x SenseCAP ONE Meteor Sensor ological Compact All-in-one
• 1 x 8-pin M12 communication cable (standard length 3 meters; an optional waterproof aviation connector is available for use with the SenseCAP SensorHub datalogger. If not needed, it can be removed manually)
• 1 x USB Type-C cable, for device configuration
• 6 x Screws
• 1 x Flat washer (for opening the configuration port a)