Duet3D PanelDue Integrated 5'' v1.0 - pre-configured color touch screen for Duet 2 and Due boards

PanelDue is a color touchscreen controller for Duet motherboards and other cnc and 3D printer control boards that support it.

It arrives already configured and with firmware installed to work with all Duet 2 and Duet 3 family motherboards. Simply connect it to one of the Duet motherboards via the included cable and it is ready to use.

The integrated version consists of high-quality 7- or 5-inch TFT LCD panels with 800x 480 pixel resolution, custom-made by a leading manufacturer, with the PanelDue controller integrated on the LCD PCB.

The controller PCB and firmware support 3 screen sizes: 4.3 ", 5" and 7 ", at two resolutions: 480 × 272 (4.3-inch display) or 800 × 480 pixels (5- and 7-inch displays).

The lower resolution of the 4.3" display means that not as much information can be displayed on the screen, such as a maximum of 4 extruders.

Connection specifications:

• 5V power supply from the 2-wire motherboard.
• Asynchronous 2-wire serial interface with 3.3 V signal level (input tolerates up to 5 V).
• Connections for the micro SD card built into the screen PCB are available via a 10-way ribbon cable 300 mm long (maximum recommended length). This connection is not necessary for screen operation, in fact the SD here is in addition to the SD on the motherboard that already serves as memory for the machine's gcode files.

The 4-wire cable to connect PanelDue to the Duet 2 or Duet 3 motherboard ( 2 wires for serial connections and 2 wires for power supply) is supplied with the screen (it has a length of about 1m).

https://docs.duet3d.com/Duet3D_hardware/Accessories/PanelDue