Package contains: 1 x MK3 30x30 cm plate - 12V / 24V
The object for sale is the heated plate MK3 for 3D printers RepRap, Mendel, Prusa.
The heated plate allows an adhesion of the first layer of printing avoiding deformation of the object that is going to create (especially useful in case of ABS printing).
Warning! Before touching it, turn off the power and wait at least 10 minutes for it to cool down to avoid burns. Do not leave it unattended to avoid damage to children or inexperienced people.
Size: 300x300 mm Volt: 12V / 24V Fixing holes diameter: 3.40 mm / Installation: 4 screws - not included Hole diameter for temperature probe fixing: 2,50 mm / Temperature probe: pre-drilled in the center - not included
Hole spacing: 288.31 mm Power cable: not included Due to the high current absorption, some devices may require a relay with separate power supply to avoid excessive direct loads on the management electronics.
For further information please contact us.
The item you will receive may differ in some features from the one represented in the picture, depending on the production batch. Despite this, the functionality is maintained.
il piano riscaldante mk3 12/24v da 30cmx30cm che temperatura massima raggiuge? che potenza in watt ha? inserite i dettagli
Per questa tipologia di piano riscaldato la temperatura di utilizzo massimo è di circa +100°C.
La potenza del piano in alluminio MK3 30*30cm indicata dal produttore è di 115-145W, dunque può utilizzare un alimentatore 12V 20A.
Per una maggiore omogeneità e performance del piano di stampa può utilizzare il sistema pad silicone + piastra rettificata in alluminio. In tal modo può utilizzare una piastra di spessore superiore ai 3mm di questo piano, come ad esempio 6mm.
Può completare il sistema con un piano magnetico e uno in PEI per stampare senza l'utilizzo di piano in vetro.