Printing plate with FR4/G10 surface 355x355mm

The 355x355mm FR4/G10 printing plate is designed for 3D printers with a top size of about 35x35cm.

Created in response to strong demand from our customers, we have integrated this innovative series of FR4 printing surfaces. Made with 0.5 mm thick FR4 adhered to a flexible plate, this solution is more than 60 percent thicker than the industry standard, providing superior wear resistance and durability. The plate is single-sided, with the back left hollow to improve sealing compared to traditional double-sided plates.

Key Features.

• 355x355mm FR4/G10 surface specifically designed for FDM 3D printers
• 0.5mm thickness of FR4, a highly wear-resistant material.
• Flexible plate over 60% thicker than the industry standard, providing greater stability and durability.
• Single-sided: one active surface to improve adhesion of the printed part.

Advantages:

• Increased wear resistance: the FR4/G10 material and extra thickness offer long service life.
• Versatility: suitable for a wide range of printing materials.
• Improved adhesion due to single surface, ideal for reliable and accurate prints.
• Improved alignment tolerance: 5mm oversize reduces the risk of lost print space.

Usage temperatures:

Usage temperatures for an FR4/G10 printing plate may vary depending on the printing material, but generally:

• FR4/G10 is resistant to temperatures up to about 140-150°C, making it suitable for most prints with standard filaments such as PLA, PETG, and ABS.
• It can also handle higher temperatures up to 180°C for limited periods, but prolonged use at these temperatures could affect the life of the plate.

This temperature range is ideal for a wide variety of print materials, providing a durable, heat-resistant surface.

Cleaning:

Cleaning the FR4/G10 printing plate is important to ensure optimal adhesion and prolong its life. Here's how to do it:

1. Daily cleaning (after each print):

   • Use a soft cloth or paper towel moistened with isopropyl alcohol (at least 90%) to remove filament residue, oil or grease from your hands.
   • Gently wipe the surface to avoid accumulation of dust or print residue.

2. Deep cleaning (periodic):

   • If the surface is particularly dirty or has persistent residue, wash the plate with warm water and mild soap.
   • Use a soft sponge to avoid scratching the surface. Rinse well and dry completely before reusing.

3. Avoid:

   • Harsh or abrasive chemicals, such as strong solvents or hard brushes, as they can damage the FR4 surface.
   • Touch the plate with bare hands to prevent skin oil from compromising adhesion.

Package contains: 1 x Printing plate with FR4/G10 surface 355x355mm

The magnetic plate is to be purchased separately.