Package contains: 1 x Motor board with L298D driver
Board equipped with the integrated ST L298N, a power driver for both stepper and DC motors with Full Dual H-bridge configuration. The IC is already mounted on a heat sink. You can control up to 4 phase stepper motors, two DC motors or a bipolar stepper motor. Configurations can be set on the board by means of jumpers. The control logic inputs are 5V TTL and therefore interfaced with microcontroller boards such as Arduino, Raspberry, ATMEL chips, PIC, ARM, etc..
The board can also be used to drive relays or solenoids.
Control logic power supply: 5V - Load power supply: 5-37V
Load current: 2A (max) - Maximum power: 25W
With power supply lower than 16Vdc you have to supply only one power supply on terminals "GND" and "+12V", the jumper "CON5" has to be enabled and on terminal "+5V" you will get a 5V stabilized output.
With power supply higher than 16Vdc the jumper "CON5" must be removed, supply power on terminals "GND" and "+12V" and a second +5V supply on terminals "GND" and "+5V" (double voltage with negative in common).
Specifications in the data sheet inside the image gallery. For further information please contact us.
The object that you will receive may differ in some features from the one represented in the picture, depending on the production batch. Despite this, the functionality is maintained.