Revo Hemera XS - E3D

Shorter and lighter. Revo Hemera XS is 92g lighter and 11mm shorter than the classic Hemera. Thanks to a custom stepper motor, it is able to move faster on the 3D printer's motion system with less inertia than the classic Hemera, reducing printing artifacts such as ghosting. Its compact size also takes up less space within the 3D printer build volume, which is useful for smaller 3D printers.

Compatible with a wide range of 3D printing filaments. Achieves excellent performance with all 3D printing materials, especially difficult ones such as flexibles and abrasives. Advanced extrusion and shrinkage control enables 3D printing of soft flexible materials with Shore hardness up to 75A!

Backward compatible. Revo Hemera XS heatsink geometry accepts Revo nozzles and V6 nozzles with a heatbreak Hemera (sold separately).

All the power you need. Revo Hemera XS has all the extrusion force needed to handle the entire E3D ecosystem, including high-flow HotEnds such as SuperVolcano and high-flow Revo nozzles (coming soon!).

Reduced likelihood of filament stripping. In the event of a jam, Revo Hemera XS's filament drive mechanism locks instead of ripping the filament, making it easier to recover and resume 3D printing.

Easy nozzle replacement with Revo. A variety of Revo nozzles enhances the capabilities of your 3D printer without having to go through a difficult nozzle replacement process. Each Revo nozzle can be replaced manually. No tools, no hot clamping.

Increased safety. The Revo HeaterCore's power supply is reduced as it heats up, thanks to its built-in PTC behavior. This provides greater protection against risks caused by thermal runaway.

Flat mounting with T-slot. The custom mounting system allows a variety of accessories to be mounted on this extrusion system, such as bed leveling probes, expansion boards, and more!

Just add a 3D printer. Everything you need to start 3D printing is in the box, including Revo nozzles and a Revo HeaterCore. Just mount it on your 3D printer and you're done!


Key Features
- 92g lighter and 11mm shorter than the classic Hemera for lower inertia at high printing speeds, reducing printing artifacts.
- Maximum temperature: 300°C
- Voltage: 12V/24V
- Filament diameter: 1.75 mm
- Works with Revo HeaterCore and Revo Nozzles
- Flat T-slot mounting system
- Dimensions: 85.5 x 44 x 65.25 mm (HxWxD)
- Custom-designed heat sink directs air up and away from the 3D print to reduce warping
- Works with V6 nozzles when paired with a Hemera heatsink (sold separately)
- Direct drive by default. Works with Bowden configurations using a Bowdaptor adapter (sold separately)
- Recommended current: 1.40 peak
- Nominal steps per mm (x16): 397
- Pitch angle of 1.8
- Current rating of 1.33A

The kit includes
- 1 Hemera XS assembly
- 1 Hemera XS mounting kit
- 1 x 40 x 40 x 10 mm fan (12V or 24V)
- 1 x Revo HeaterCore (12 or 24V)
- 1 x Revo HeaterCore spring
- 1 x Extension cable kit

Single nozzle kit:
- 1 x 0.40 Revo nozzle in brass

Miscellaneous nozzle kits:
- 1 x Revo nozzle in brass 0.25, 0.40, 0.60 and 0.80