Galaxy PLA is an intense metallic-coloured PLA 3D printing filament based on the popular EasyFil PLA compound. Galaxy PLA is enriched with a very high amount of silver aluminium micro-flakes, which give printed objects a sparkling, reflective and shiny effect.
Printed objects exhibit subtle shades of colour and brightness, without layer visible. Despite the high content of aluminium micro-flakes, Galaxy PLA is not abrasive to the 3D printer nozzle.
Unique features
Extremely shimmering and brilliant finish
Prints 3D objects without layer visible
Non-abrasive for the 3D printer nozzle
Deep, intense colour
Very easy to print
Print without warping and without deformation after cooling
Improved flow and adhesion between layer
Excellent adhesion of the first layer on different print surfaces (heated and unheated)
General printing guidelines *
Nozzle diameter: ≥ 0.15 mm
Height layer: > 0.1 mm
Flow rate: ± 100%
Print temperature: ± 185 - 215 °C
Print speed: Average
Shrinkage: Yes ± 5 mm
Heated plate: ± 50 - 60 °C
Fan speed: 80-100%.
Recommended print surface: Blue Tape / Glass
Closed printer: Not required
Heated print chamber: No
Experience level: Beginner
*) The above settings are intended as guidelines for finding optimal printing parameters. These ranges should work with most printers, but feel free to experiment outside these values if you feel it is suitable for your printer. There are many different types of printers, hot-end and offset, so it is extremely difficult to provide a universal setting that applies to all.
The item you receive may differ in some features from the one shown in the photo, depending on the production batch. Despite this, functionality is maintained.
Qual è il materiale migliore per pezzi che devono stare all'esterno?
L'ASA è il materiale consigliato per l'uso esterno. A differenza dell'ABS, l'ASA è altamente resistente ai raggi UV, non ingiallisce e mantiene le sue proprietà meccaniche anche sotto l'esposizione diretta del sole e degli agenti atmosferici.
Perché la mia stampa in PETG presenta molti "fili" (stringing)?
Il PETG è un materiale molto viscoso. Per ridurre lo stringing, è fondamentale calibrare correttamente la temperatura di stampa e la distanza di ritrazione. Inoltre, assicurati che il filamento sia asciutto, poiché l'umidità assorbita peggiora drasticamente questo fenomeno.
Posso mescolare resine di marche diverse?
In generale è sconsigliato, poiché ogni resina ha tempi di esposizione e composizioni chimiche differenti. Mescolarle potrebbe portare a fallimenti di stampa o a una polimerizzazione incompleta del pezzo.
Come si smaltiscono i residui di resina 3D?
La resina liquida è considerata un rifiuto speciale. Non deve mai essere gettata negli scarichi domestici. È necessario polimerizzare i residui liquidi (esponendoli al sole o a lampade UV) fino a renderli solidi, dopodiché possono essere smaltiti seguendo le normative locali sui rifiuti plastici speciali.