Package contains: 1 x 50g net PLA Strongman filament Ø 1.75mm
Strongman filament was developed because printing with ABS filament is more difficult. Compared to conventional PLA filament, Strongman PLA is much more resistant, especially to impact. It is used for printing drones, bearings and all products that require higher strength. In terms of thermal resistance, this filament has the same characteristics as regular PLA filament.
For good results it is necessary to print at a temperature of 190-220°C and the plate must be heated to 50-60°C. Please note that the printing temperature may differ slightly depending on the printer used.