This nozzle is suitable for all Budaschnozzle Hotends, with M6 female thread. If you need to replace a nozzle you can loosen the nozzle after it has reached 160 ° C. If you are not at this temperature, any residual ABS / PLA on the inner screw will affect the movement of the objects, creating difficulties. Removing the hot-cold nozzle with the presence of plastic in the inner screw can potentially damage the nozzle thread and thread of the inner screw itself. Take extreme care in handling the nozzle at these temperatures, as they can cause serious burns. Use clamps or gloves resistant to temperatures. If the installed nozzle has never been used, it is not necessary to unscrew it at high temperatures but can be removed with the hot end at room temperature.
The item that you can get for certain features differ from the one shown in the photo, depending on the production lot. However, the functionality is retained. The description of this item has been provided by automatic translation. If you have any questions, please do not hesitate to contact us.