EasyFil ABS is a high-quality 3D printing filament based on ABS (Acrylonitrile Butadiene Styrene), which is easy to use and optimised for FFF / FDM printing technology. This filament offers high impact resistance and superior print stability compared to normal ABS, printing at slightly higher temperatures than usual.
Key Features
- Excellent process stability and limited warping
- Significantly higher impact resistance than standard ABS
- Very strong and durable
- Lightweight
- Vicat softening temperature ± 103 °C
- Wide range of bright and opaque colours
General printing guidelines *
| Nozzle diameter: ≥ 0.15 mm |
Height layer: ≥ 0.1 mm |
Flow rate: ± 104 |
| Print temperature: ± 230 - 255 °C |
Print speed: Average |
Shrinkage: Yes, ± 5 mm |
| Heated plate: ± 100 °C |
Fan: 0 - 35% |
Experience level: Intermediate |
* The settings shown are general guidelines; they may vary depending on the printer,hot-end and calibration.
Filament length
| ρ = 1.03 g/cc |
Spool 50 g |
Spool 0.75 kg |
Spool 2,3 kg |
| Ø 1.75 mm |
± 20,2 m |
± 303 m |
± 928 m |
| Ø 2.85 mm |
± 7,6 m |
± 114 m |
± 350 m |
Package contains: 1 x EasyFil ABS - Magenta - Formfutura
