DimaFix Spray - print bed adhesive in spray format

What is Dimafix Spray?

Dimafix® is a product from DIMA 3D to be used for better adhesion of material on the print surfaces of heated-platen FDM printers.
Dimafix® Spray is the spray can format.

What are the features of Dimafix Spray?

• Dimafix provides a strong grip between the printed material and the printing surface so that "warping" is no longer a problem even in large ABS prints.
• DimaFix spray is an adhesive for 3D printers that requires a heated print bed.
• Dimafix is an aerosol adhesive spray in a 400mL size that provides a strong bond between the first layer and the build plate when the platen is heated above 60°C.
• Below 45°C DimaFix becomes inactive, so prints can be easily removed from the build plate.
• The adhesive spray is completely soluble in water, so cleaning the build plate is an easy process, whatever your printing surface.

At what heated platen temperatures can Dimafix Spray be used?

Different temperatures of the printing surface result in different levels of adhesion.

• Below 60°C: no adhesion, objects can be peeled off the plate
• 60 - 75°C: medium adhesion, for simple geometries
• 75 - 95°C: high adhesion, for complex geometries and long prints
• Above 95°C: very high adhesion, for very complex geometries and very long prints

How to apply Dimafix spray correctly?

1. Shake Dimafix Spray well before use
2. Clean the print bed of your 3D printer
3. Check that the temperature of the platen is below 50°C
4. Apply Dimafix Spray to the print bed (when the bed is cold)
5. Wait a few seconds for the adhesive layer to dry
6. Heat the print bed to the appropriate temperature for the filament used and start printing
7. When printing is finished, wait for the print bed to cool down
8. Remove the printed piece from the printing table (when the table is cold)

Since these are chemical compounds, it is preferable to use them in a well-ventilated room.

Package contains: 1 x DimaFix Spray - fixative for 3D printing