This Bondtech CHT ® CSP (Creality SPider) nozzle increases the fusing capacity of your hotend, allowing you to print faster and save time. It also improves the adhesion between layers of your 3D prints, allowing you to get stronger parts.
See the compatibility list and product alerts below.
Features
- Brass body
- Nickel coating
- 4 pieces per package
- Sizes included: 0.40, 0.60, 0.80, 1.0 mm
- Optimized for 1.75 mm filament
- Compatible with 2.85 mm filament
- Requires 6 mm wrench
Patented Core Heating technology
Europe: Registration number EP3445568A1 - Publication date: 01/12/2021
USA: Registration number US11712847B2 - Publication date: 01/08/2023
Metal 3D printer nozzles with one or more holes designed to increase the standard circular area of heating walls.
Advantages of the Bondtech CHT ® CSP coated brass nozzle
- Increased melting capacity due to increased heating wall surface area
- Flow increases between 25% and 65% (dependent on material and settings)
- Excellent value for money
- Ultra-precision machining
- Brass nozzle with nickel coating
- Conforms to the nozzle standard: Spider (M6×1×9×16.8)
- Can be used with hotend of 1.75 mm or 2.85 mm
- Flow improvements may vary depending on hardware, materials and print settings
Advantages of Bondtech CHT ® technology
The Bondtech CHT ® nozzles divide the filament into 3 thinner filaments, allowing the material to fuse from the inside. As a result, fusing occurs faster and higher flow rates can be used.
Benefits of nickel coating
Nickel coating protects brass nozzles from corrosion, erosion and abrasion, increasing corrosion resistance and reducing the coefficient of friction. This allows for smoother filament feeding and delays plastic adhesion to the nozzle surface.
Use this nozzle with the following rigid materials:
PLA, ABS, HIPS, PC, TPE, Nylon, PETG, ASA, PP, PVA
For technical or abrasive materials, we recommend using other nozzles from the range Bondtech.
Different sets of nozzles for different materials
Using different materials with the same nozzle causes buildup inside, which can cause clogging.
It is recommended to change nozzles each time you change materials.
NOTICE: Avoid cold replacement of nozzles Bondtech CHT BiMetal MK8
Heat the heating block to 280 °C (or at least above 250 °C) before removing or tightening any nozzles.
Use a maximum torque of 1.5 Nm.
The nozzles Bondtech CHT CSP are compatible with the following hotend:
- Creality Spider hotend (V1)
- Thehotend Creality Spider can be used on the following 3D printers Creality:
- Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2
- Ender-5 / Ender-5 Plus / Ender-5 Pro
- Ender-6
- Ender-7
- CR-10 Series
- CR-10S Series
- CR-20 Series
Package contains: 4 x CHT CSP Spider Coated Brass Nozzle - Bondtech (0.40, 0.60, 0.80, 1.0 mm)
