MagicFil Thermo PLA - Grey - Formfutura

General printing guidelines * Nozzle size: ? 0.15mm Layer height: ? 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ?: 1.24 g/cc 50 gr coil 0.5 Kg spool Ø 1.75mm ± 16.8m ± 168m Ø 2.85mm ± 6.3m ± 63m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.