EasyClean Resin Cleaner

Key features Superb cleaning properties Breaks down resin better than IPA and other solutions Doesn't leave any residue, cloudiness, or white haze No sticky prints Compatible with all UV curable resins for SLA, DLP, and LCD 3D printing technologies Compatible for cleaning with magnetic stirrers, ultrasonic cleaners, and washing/curing stations No transport restrictions Not classified as a dangerous good by ADR and IATA Non-flammable Limited odor Can also be used for cleaning build plates, vats, and other surfaces that come in contact with resins Long shelflife up to 24 months How to use Put the resin print in a tub filled with EasyClean resin cleaner Clean for 10-15 minutes when cleaning by hand, or 5 minutes when using an ultrasonic cleaner After cleaning let the printed object dry or rinse with tap water Storage Store EasyClean in a well-ventilated area in its original HDPE bottle, or jerrycan. Make sure the bottle or jerrycan is tightly closed and stored at a temperature below 25°C. When stored properly EasyClean Resin Cleaner has a shelflife up to 24 months.